Optrel Swiss Air Tight Fit Half Mask
Silicone tight-fitting half mask for the Optrel Swiss Air PAPR, available in Small, Medium and Large. Fit testing and a clean-shaven seal area are required.
Couldn't load pickup availability
Overview
The Optrel Swiss Air Tight Fit Half Mask is the silicone facepiece used with the Swiss Air Tight Fit PAPR configuration. Choose Small, Medium or Large so the mask can form the required seal to the face.
Key details
- FitTight-fitting
- MaterialMedical-grade silicone
- SizesSmall, Medium or Large
- Fit testingRequired
- Seal areaWearer must be clean shaven where the mask seals
- Air systemOptrel Swiss Air PAPR only
Choosing your size
- SmallManufacturer part 4160.550.W
- MediumManufacturer part 4160.560.W
- LargeManufacturer part 4160.570.W
Select the size that achieves the required seal and verify fit in accordance with your respiratory-protection program. This mask is not compatible with the e3000X PAPR system.
What else do I need?
This product is the half mask only. It must be used with the Optrel Swiss Air Tight Fit PAPR blower configuration and approved system components.
Protection
Optrel lists the Swiss Air Tight Fit system to NIOSH PAPR-100N under approval TC-21C-1363 and as a TM3 tight-fitting PAPR configuration. These approvals apply to the complete configured system, not to the half mask on its own.
Protection & compliance
- Respiratory protection
-
- NIOSH TC-21C-1363PAPR-100N Swiss Air Tight Fit configurationApplies to the complete Swiss Air Tight Fit PAPR configuration with the correct mask size and approved system components. The half mask alone is not a complete respirator; fit testing is required for the tight-fitting facepiece.
- EN 12942TM3 tight-fitting PAPR configurationOptrel lists the Swiss Air Tight Fit configuration as TM3. Use the correct size and maintain an effective face seal.
