DRIFIRE 4.4 FR Coverall

You'll be comfortable and protected on the job site with the durable and lightweight DRIFIRE 4.4 FR coverall. With 4.4 oz. FR blend, this fabric will not melt, drip or ignite and is dual certified to protect against flash fire and arc flash hazards. This coverall also protects you from uncomfortable distractions with moisture-wicking and odor control. Quickly identify compliance with exterior labeling and carry what you need for the job at hand with 2 front pockets. This coverall is Made in the USA and comes in a stylish navy color.

1. Arc Rating: 8 cal/cm²
2. CAT 2
3. Fabric/Material: 4.4 oz. DRIFIRE Blend
4. Dual certified to protect against flash fire and arc flash hazards
5. Lightweight, breathable fabric for maximum comfort
6. Moisture-wicking technology to keep you dryer
7. Inherently flame resistant, FR protection will not wash/wear out
8. Odor control technology
9. Quickly identify compliance with exterior labeling
10. Lightweight yet durable fabric
11. 2 front pockets
12. FR fabric will not melt, drip, or ignite
13. Color: Navy
14. Made in the USA

Certifications

FR Coverall Certifications

1. Arc Rating: 8 cal/cm²
2. CAT 2
3. NFPA 70E
4. NFPA 2112
5. CSA Z462
6. ASTM F1506
7. OSHA 1910.269

Sizing & Care

FR Coverall Sizing Chart

FR Coverall Instructions

1. READ THE GARMENT LABEL AND LAUNDER PER INSTRUCTIONS ON GARMENT LABEL.
2. DO NOT use chlorine bleach or detergents containing bleach. DO NOT use fabric softeners. DO NOT iron.
3. Wash/Laundering Instructions: Machine wash warm. Tumble dry low.
4. Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when garment becomes soiled with dirt, greases, oils, etc.
5. If contaminants cannot be removed after laundering, it is best to discontinue use of garment.