Bullard 88VX Abrasive Blasting Respirator with ICE Free-Air Pump

This 88VX package is for abrasive-blasting jobs that need a portable electric Free-Air source. It combines the 88VX3235 respirator with the ICEPUMP11, 100 ft of 1/2 in. breathing-air hose and Frigitron 2000 cooling.

Why choose the ICE package

• Electric Free-Air source: the ICE pump supplies breathing air without relying on a plant compressed breathing-air line.
• Jobsite mobility: the pump is built into a roll cage with wheels for easier movement.
• Oil-less operation: the pump does not generate carbon monoxide in the breathing-air stream.
• Cooling included: Frigitron 2000 cools the incoming air before it reaches the wearer.
• 88VX protection: APF 1,000 loose-fitting respirator helmet with no individual fit testing required.

What's included

• 88VX3235 respirator with the F35 Free-Air setup.
• ICEPUMP11 electric Free-Air pump.
• 100 ft of 1/2 in. breathing-air hose.
• Frigitron 2000 cooling.

Before you buy

• Requires a suitable electrical supply.
• Place the pump inlet in a clean location that provides Grade D breathing air or better.
• Hose, connection and operating pressure must match the approved Bullard configuration.
• The 88VX face shield provides high-impact face protection but does not replace required safety glasses or goggles.
• Do not use in IDLH atmospheres or where oxygen is below 19.5%.

If you only need the respirator and already have the required breathing-air equipment, see the Bullard 88VX Abrasive Blasting Respirator Helmet.