Carbon Armour H3 Jacket - 10 Cal Arc Flash, Rip Stop Radiant Heat & Molten Splash Protection

$172.56 - $189.82
Shipping calculated at checkout.
$172.56
$172.56
SKU: C07H3GCBG SM30
Jacket - Fire Resistant and Arc Flash Resistant, OPF Blend Fabric, 30 in. Long, Covered Snap Front Closure, Inner Chest Pocket - National Safety Apparel
$172.56
$172.56

Made in Ohio. Common sizes in stock.

Additional sizes available in 1-5 weeks.
Contact us or call (833) 408-0500 to discuss customization options.

30 Inch Jacket for Radiant Heat, Molten Metal Splash, and Arc Flash Protection

  1. Arc Rating: 10 cal/cm²
  2. CAT 2
  3. Fabric/Material: 8.6 oz. OPF Blend, Rip Stop
  4. Exceptional tensile and tear strength
  5. Moisture wicking and quick drying
  6. Covered snap front closure
  7. Inside left chest pocket
  8. Snaps at wrist for adjustment
  9. Anti-static fabric
  10. FR fabric will not melt, drip, or ignite
  11. Made in the USA
Specifications

Molten Metal Jacket Compliance

  1. Arc Rating: 10 cal/cm²
  2. CAT 2
  3. NFPA 70E
  4. CSA Z462
  5. ASTM F1506
  6. OSHA 1910.269
  7. EN ISO 11611 A1, Class 2; A2, Class 2; 6.8 impact of spatter, Class 2; 6.9 heat transfer (radiation), Class 1

 

Molten Metal Jacket Sizing Chart

Carbon Armour H3 Jacket Sizing Chart

 

Molten Metal Jacket Product Care

  1. READ THE GARMENT LABEL AND LAUNDER PER INSTRUCTIONS ON GARMENT LABEL.
  2. DO NOT use bleach, chlorine, or hydrogen peroxide. DO NOT use fabric softeners.
  3. Turn garment inside out prior to laundering. Machine wash cold with like colors (Max. 105ºF / 41ºC) Tumble dry low (Max. 140ºF / 60ºC)
  4. Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when garment becomes soiled with dirt, greases, oils, etc.
  5. If contaminants cannot be removed after laundering, it is best to discontinue use of garment.
Customize It

Experience the X1 Safety Difference

We work closely with innovative manufacturers across the USA to understand their modern solutions to age old challenges facing foundries, mills, and glass manufacturers. By serving as a single point of contact for strained manufacturing sales and technical teams, X1 Safety can provide small and mid-sized foundries and mills with a level of access generally reserved for your largest competitors.

Contact us or call (833) 408-0500 to meet your dedicated account manager today. We have vans on the ground on the East Coast, West Coast, and Midwest and would love an opportunity to visit your facility. With a better understanding of your specific safety needs, we can provide:

Garment Customization

Most garments can be made to size and length specifications that are not shown in on our website. There is no minimum order on custom garments, but there will be a 1-5 week lead time.

Sample Swatches or Wear Trials

We bring off-the-shelf solutions for your team to test and analyze and help you determine how they can be customized for your unique circumstances.

Stocked Customizations

We will stock your factory customized and other standard safety equipment you count on to help you avoid long lead times.

Your Logo Here

Make safety personal with product customization available on most garments, gloves, glasses, and hard hats.

Call Us On It

Step out of the shadows of the multinational behemoths your vendors serve and enjoy our hands-on service. We don’t have a call center in India so you may need to leave a message, but it is our promise that we will get back to you within an hour. Go ahead, call us on it - (833) 408-0500.