Fabric/Material:GORE-TEX PYRAD® Polyester on ePTFE.
HYDROFlash FR™ (2 Layer PYRAD) is the lightest weight waterproof, breathable flash Fire rated garment available.
Lightweight, breathable, and fast drying.
100% waterproof and windproof.
Resists cold cracking in low temperatures.
Hot liquid and steam resistant.
Petroleum and oil-based mud resistant.
FR silver segmented reflective trim.
Compliant to CSA Z96 Class 3.
Made in USA.
FR/AR Jacket Features
Hook and loop straps at cuffs.
Jacket hood available.
Jacket has zippered chest pocket and two lower hand warmer pockets.
Jacket has 2 mic/gas detector tabs.
FR/AR Bib Overall Features
Chest pocket, 2 lower cargo pockets, and zip fly.
Zippered leg opening with hook and loop strap.
Sizing & Care
READ THE GARMENT LABEL AND LAUNDER PER INSTRUCTIONS ON GARMENT LABEL.
DO NOT use bleach or hydrogen peroxide. DO NOT use fabric softeners.
Wash/Laundering Instructions: Wash separately from other garments. Machine wash warm (max. 120°F/50°C) using mild detergent. Rinse 4 times (adding extra rinse to standard 3-rinse cycle) to remove all soil and detergent residues. Dawn Dish Liquid is recommended for oil based stains. Pre-treat the area, soak for stubborn stains or mild stain treatments may be used. Ensure the product is completely rinsed from the fabric before drying.
Drying: Turn garment inside out before drying. Tumble dry using permanent press setting (medium). Tumble drying is recommended to protect garment's water repellent treatment.
Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when garment becomes soiled with dirt, greases, oils, etc.
If contaminants cannot be removed after laundering, it is best to discontinue use of garment.
Certifications
Arc Rating: 30 cal/cm²
CAT 3
ANSI/ISEA 107 Type R Class 3
CSA Z462
ASTM F2733
ASTM F1891
CSA Z96 Class 2
OSHA 1910.269
ASTM F903
Gas Probe Shirley Method 138:2000, EN 1149-3/2004 & EN 1149-5/2008